Otserver - Revision history

FellowTraveler: updated, lots of info was old

2015-07-08T21:58:59Z

updated, lots of info was old

FellowTraveler: typo

2013-06-13T19:38:54Z

typo

FellowTraveler: spacing

2013-06-13T19:38:25Z

spacing

FellowTraveler: minor re-arrange

2013-06-13T19:37:10Z

minor re-arrange

Cryptoman at 02:16, 12 June 2013

2013-06-12T02:16:47Z

Unknown user: Created page with "After you @make install@, the OT Server will be named @otserver@ and most likely will be located in @/usr/local/bin@ You can probably run it simply by typing: @otserver@ If ..."

2013-06-08T04:26:23Z

Created page with "After you @make install@, the OT Server will be named @otserver@ and most likely will be located in @/usr/local/bin@ You can probably run it simply by typing: @otserver@ If ..."

New page

After you @make install@, the OT Server will be named @otserver@ and most likely will be located in @/usr/local/bin@

You can probably run it simply by typing: @otserver@

If you run it with blank data, it will walk you through the process of creating a fresh server. You will want to make use of the sample contracts in the sample-data folder for this process.

You can also copy sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders for server_data and client_data into @~/.ot/server_data@ and @~/.ot/client_data@

-----

@make install@ creates the @~/.ot@ folder, including the server's folder: @~/.ot/server_data@ (That is where the otserver will look, by default, to load its data.

The main datafile is: @~/.ot/server_data/notaryServer.xml@

When you first start playing with OT, be sure to keep an eye on the server output while you are running your client, so you can see what is happening on the server side.

-----

See the include/otserver/OTServer.h and src/otserver/OTServer.cpp files for the bulk of the server code.

-----

''See also:'' The [[TestGUI|OT Test GUI]] The [[opentxs|command line test wallet]] The [[API|OT API]] and [[Use Cases]].

@@ Line 1: / Line 1: @@
-After you <code>make install</code>, the OT Server will be named <code>otserver</code> and most likely will be located in <code>/usr/local/bin</code>
+After you <code>make install</code>, the OT Server will be named <code>opentxs-notary</code> and most likely will be located in <code>/usr/local/bin</code>
-You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the contents <code>Open-Transactions/sample-data/ot-sample-data/server_data/*</code> and <code>Open-Transactions/sample-data/ot-sample-data/client_data/*</code>, respectively, into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
+You can then probably run it simply by typing: <code>opentxs-notary</code>
 -----
-If you run it with blank data, it will walk you through the process of creating a fresh server. You will want to make use of the sample contracts in the sample-data folder for this process.
+If you run it with blank data, it will walk you through the process of creating a fresh server. You will want to use the Moneychanger GUI as well, during this process.
 OT creates the <code>~/.ot</code> folder, including the server's folder: <code>~/.ot/server_data</code> (That is where the otserver will normally look, by default, to load its data.)
@@ Line 14: / Line 13: @@
 When you first start playing with OT, be sure to keep an eye on the server output while you are running your client, so you can see what is happening on the server side.
 -----

@@ Line 1: / Line 1: @@
 After you <code>make install</code>, the OT Server will be named <code>otserver</code> and most likely will be located in <code>/usr/local/bin</code>
-You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders <code>Open-Transactions/sample-data/ot-sample-data/server_data/*</code> and <code>Open-Transactions/sample-data/ot-sample-data/client_data/*</code>, respectively, into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
+You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the contents <code>Open-Transactions/sample-data/ot-sample-data/server_data/*</code> and <code>Open-Transactions/sample-data/ot-sample-data/client_data/*</code>, respectively, into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
 You can then probably run it simply by typing: <code>otserver</code>

@@ Line 1: / Line 1: @@
 After you <code>make install</code>, the OT Server will be named <code>otserver</code> and most likely will be located in <code>/usr/local/bin</code>
-You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders <code>server_data/*</code> and <code>client_data/*</code> into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
+You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders <code>Open-Transactions/sample-data/ot-sample-data/server_data/*</code> and <code>Open-Transactions/sample-data/ot-sample-data/client_data/*</code>, respectively, into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
 You can then probably run it simply by typing: <code>otserver</code>

@@ Line 1: / Line 1: @@
 After you <code>make install</code>, the OT Server will be named <code>otserver</code> and most likely will be located in <code>/usr/local/bin</code>
-You can probably run it simply by typing: <code>otserver</code>
+You should first copy the sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders <code>server_data/*</code> and <code>client_data/*</code> into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
-If you run it with blank data, it will walk you through the process of creating a fresh server. You will want to make use of the sample contracts in the sample-data folder for this process.
+You can then probably run it simply by typing: <code>otserver</code>
-You can also copy sample data from the sample data folder, which includes pre-created server and client data, allowing you to instantly get OT up and running without having to create anything. Just copy the sample data folders for server_data and client_data into <code>~/.ot/server_data</code> and <code>~/.ot/client_data</code>
+-----
------
+OT creates the <code>~/.ot</code> folder, including the server's folder: <code>~/.ot/server_data</code> (That is where the otserver will normally look, by default, to load its data.)
 The main datafile is: <code>~/.ot/server_data/notaryServer.xml</code>
 When you first start playing with OT, be sure to keep an eye on the server output while you are running your client, so you can see what is happening on the server side.
 -----
-See the include/otserver/OTServer.h and src/otserver/OTServer.cpp files for the bulk of the server code.
+See the <code>include/otserver/OTServer.h</code> and <code>src/otserver/OTServer.cpp</code> files for the bulk of the server code.
------
+''See also:''
-''See also:'' The [[TestGUI|OT Test GUI]] The [[opentxs|command line test wallet]] The [[API|OT API]] and [[Use Cases]].
+* The [[TestGUI|OT Test GUI]]